全國統一熱線：021-32205893
VERSA電磁先導控制閥授權總代理
VERSA的C9系列新品
C9 NAMUR是Versa NAMUR系列閥門的成員。 C9是一個“NPT端口NAMUR配置的閥門，設計用于為更大的齒條和小齒輪執行器提供更高的流量。
該電磁先導控制閥可用作單電磁閥或雙電磁閥2位或3位閥。
電氣連接，面積分類和功率要求的完整選擇使得zui苛刻和苛刻的規格易于滿足。
C9 NAMUR閥可用作4路（用于雙作用執行器）或3路（用于彈簧復位或故障安全執行器）。另外，這種閥門是現場可轉換的，不需要特殊工具，墊片或密封劑。
搬遷港口板塊可將3路轉換為4路，或4路轉換為3路。當四通閥轉換為三通功能時，內部鉆孔可提供ReBreather功能，防止污染物進入執行器。
ReBreather功能用于單作用執行器，以利用來自活塞側的排氣循環的空氣填充執行器的彈簧側。這可以防止腐蝕性外部空氣進入彈簧側。
提供單電磁鐵型號（用于2位置控制）或雙電磁鐵型號（用于2或3位置控制）。由于所有Versa C9 NAMUR閥都是氣密的，因此可以使用三位閥來執行器定位。
VERSA閥門功能：4路（或3路可轉換）2或3位
流速：Cv = 3.5
端口尺寸：進口和排氣口：1/2“NPT（執行器端口，O形密封圈）
介質：僅氣動，不需要潤滑器
壓力：30至150 psi（1.8至10.3 bar），單電磁鐵，彈簧復位
15至150 psi（1.0至10.3 bar），雙電磁鐵，棘爪
溫度：-4至122°F（-20至50°C），介質和環境溫度
材料：
閥體/柱塞：鋁
閥門密封件：FKM（碳氟化合物）
螺絲：不銹鋼
電磁鐵內部零件：400型不銹鋼
選擇每個螺線管選項的線圈/螺線管外殼。
安裝：直接安裝在NAMUR接口上。
可以安裝在任何位置
安裝螺絲：M6或1/4“
VERSA電磁先導控制閥授權總代理
The C9 NAMUR is the newest addition to the Versa NAMUR line of valves. The C9 is a ½” NPT ported NAMUR configured valve designed to provide higher flow to larger rack and pinion actuators.
This solenoid pilot operated valve is available as single or double solenoid 2-position or 3-position valve.
A complete selection of electrical connections, area classifications, and power requirements makes the most exacting and demanding specifications easy to satisfy.
The C9 NAMUR valve is available as either 4-way (for double acting actuators) or 3-way (for spring return or failsafe actuators). Additionally, this valve is field convertible, requiring no special tools, gaskets, or sealants.
Relocation of a port plate converts a 3-way to a 4-way, or a 4-way to a 3-way. When the 4-way valve is converted to 3-way function, an internal drilling provides a ReBreather function to prevent contaminants from entering the actuator.
The ReBreather function is used on single acting actuators to utilize air from the exhaust cycle of the piston side to fill the spring side of actuator. This prevents corrosive external atmosphere from entering the spring side.
Single solenoid models (for 2-position control) or double solenoid models (for 2 or 3-position control) are available. Actuator positioning is possible with the use of 3-position valves since all Versa C9 NAMUR valves are bubble tight.
Function: 4-Way (or 3-Way convertible) 2 or 3 position
Flow Rate: Cv = 3.5
Port Size: Inlet and exhaust: 1/2” NPT (actuator ports, O-ring sealed)
Media: Pneumatic only, Lubricator not required
Pressure: 30 to 150 psi (1.8 to 10.3 bar), Single solenoid, spring return
15 to 150 psi (1.0 to 10.3 bar), Double solenoid, detent
Temperature: -4 to 122° F (-20 to 50° C), Media and ambient
Materials:
Valve body/Plunger: Aluminum
Valve seals: FKM (fluorocarbon)
Screws: Stainless steel
Solenoid internal parts: 400 type stainless steel
Coil/solenoid housing per solenoid option selected.
Mounting: Direct Mounting on NAMUR interface.
Can be mounted in any position
Mounting Screw: M6 or 1/4”
VERSA電磁先導控制閥授權總代理
|
||
|
||
 |
會員_a.png)