0131型直動式電磁閥，BURKERT閥門
德國BURKERT寶德0131閥是直動式肘節閥。根據應用，可提供各種密封材料組合。由于執行器和流體之間的隔膜分離，腐蝕性介質（如酸和堿性溶液）也可以受到安全控制。該產品采用由PVC或PVDF制成的塑料外殼。線圈用耐化學腐蝕的環氧樹脂模制。 “Kick and Drop”電子元件被嵌入所有直流變型中，以降低電力消耗?？蛇x的電反饋功能可靠地檢測開關位置。結合根據DIN EN 17301-803 Form A的插頭，閥門滿足防護等級IP65。
直接作用，介質分離閥，直徑DN 25
防振，塊螺旋線圈系統
所有DC版本的節能降耗
電氣位置反饋提高安全性
堅固，服務友好的手動超控
對于選擇正確的產品，請參考技術數據，圖像和注釋，以便根據數據表進行正確使用。
德國BURKERT寶德電磁閥性能特點
它是一種直動和先導式相結合的原理，當入口與出口沒有壓差時，通電后，電磁力直接把先導小閥和主閥關閉件依次向上提起，閥門打開。當入口與出口達到啟動壓差時，通電后，電磁力先導小閥，主閥下腔壓力上升，上腔壓力下降，從而利用壓差把主閥向上推開;斷電時，先導閥利用彈簧力或介質壓力推動關閉件，向下移動，使閥門關閉。
德國BURKERT寶德電磁閥特點:1.在真空、負壓、零壓時能正常工作，但通徑一般不超過25mm。
2.在零壓差或真空、高壓時亦可動作，但功率較大，要求必須水平安裝。
1)常閉型，通電時電磁線圈產生足夠的電磁力把運動部件(由磁芯、閥桿、上下部的膜片/密封件構成)從閥座上提起，閥門開啟;斷電時彈簧力把運動部件壓在閥座上，閥門關閉。
2)常開型，動作方向與常閉型相反。
0131型直動式電磁閥，BURKERT閥門

Type 0131 - Direct-acting 2/2 or 3/2 way toggle valves

facebookgoogle plustwitter

The depiction of the products may differ from the actual specific design.

Show articles

Type Description

The 0131 valve is a direct-acting toggle valve. Various seal material combinations are available depending on the application. Thanks to the diaphragm-separation between actuator and fluid body, aggressive media such as acids and alkaline solutions can also be safety controlled. The offering is rounded out with plastic housings made of PVC or PVDF. The coils are moulded with a chemically resistant epoxy. 'Kick and drop' electronics are moulded into all DC variants for reduced electrical power consumption. An optional electric feedback function reliable detects the switching position. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65.

• Direct-acting, media-separated valve with diameter of up to DN 25
• Vibration-proof, block screwed coil system
• Energy-saving power reduction in all DC versions
• Increased safety with electric position feedback
• Robust, service-friendly manual override

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

Can be combined with

Type 1078

Timer Unit

Type 2508

Cable Plug Form A